The necessity of a motorcycle windshield is well known to everyone. And this is mostly made of polycarbonate that can go dirty, muddy, and dusty.
In that situation, you need to clean it well to see through clearly again. But do you know how to clean polycarbonate motorcycle windshields?
Well, this task is not very difficult. You will be able to do this by doing some easy steps.
Let’s get you through the step-by-step process of cleaning a polycarbonate motorcycle windshield. Besides, you will get to know some pro tips on what you have to do and what not while doing this job.
Get your things and start the cleaning process.
How To Clean Polycarbonate Motorcycle Windshield All By Yourself?
The motorcycle windshield is made of polycarbonate. It’s a great material to protect you from dirt and grime while riding your motorcycle. But sometimes, the windshield can be dirty and muddy. In this situation, you must clean the windshield asap.
Let’s have a look at the step-by-step process of cleaning a polycarbonate motorcycle windshield.
Step-1: Arrange Necessary Materials
In the cleaning process, you will need some crucial materials. You have to arrange these materials before starting to work. Now, the question can arise, what are these essential materials?
First, you need a clean towel in this process. Warm water is another essential substance. For better performance, a spray bottle can be used.
Moreover, sponges, water, soap, detergent, and other necessary materials you need to arrange to complete the process. These materials will extremely help you to get a perfectly cleaned polycarbonate shield, especially if you have a high-end windshield for road glide.
Step-2: Soak a Towel
At the beginning of the cleaning process, you have to wet the windshield with a towel. This process will help you to clean the windshield without scrubbing. Moreover, this step is effective to soften the dirt. Hence, the cleaning process will be easy and will not need to be scrubbed.
- Lay the soaked towel on the windshield. Wet it for at least 10 to 15 minutes.
- You can use a microfiber towel to make this step easier. In this step, you can use a spray bottle alternatively.
- Spray the water on the shield and then jump to the next step.
Step-3: Wash with Warm Water
Warm water is a very effective substance for cleaning such kinds of polycarbonate materials. It helps to wash away the dirt very quickly. So take a warm water jar and start to wash the windshield.
You can use a sponge in this process. But never scrub the shield because scratch can take place because of scrubbing. Just apply the sponge gently.
Now, rinse the shield several times to get it clean. Do not use any cloth or material that may leave scratches to the shield. Use only those clothes that are friendly with polycarbonate materials.
Step-4: Let it Dry
Before starting to dry the cleaned shield, remove every spot and dirt from the shield. Most importantly, make sure that the windshield is cleaned satisfactorily.
Now, dry the windshield perfectly. Use a piece of fabric and a clean cloth to make it dried. Paper cloth is not preferable for this task. Never make pressure or scratch on the windshield while drying it.
Most importantly, don’t dry it with sunlight. Otherwise, your shield can develop a stain and go worse.
Step-5: Remove Scratches
Scratches can take place for various reasons, even for pressurization while cleaning the shield. So you need to remove the scratches to make your motorcycle shield workable and protective.
There are a wide variety of ways to clean the scratches. But using automobile polish is a highly preferable way. You may also use plastic polish.
Use this polish in the particular space where there are any scratches. Apply the polish carefully and slowly. After a while, you will find that the scratches are no longer seen.
You will find some scratches tough to remove. In this situation, use those removals materials that are very effective and do not require excessive scrubbing.
Step-6: Apply an overlay of protectant
Applying an overlay of protectant is a crucial step to make the windshield protected from dirt. This crucial step will help you to make strong protection from any kind of dirt.
There are various kinds of spray available in the market, which are non-abrasive. Apply this kind of spray. It will not let dirt stick to the shield. Moreover, your further cleaning work will not be difficult at all.
So try to apply an overlay of protectant properly.
Things to Keep in Mind while Cleaning Polycarbonate Windshields
While going through this cleaning process, you must do some acts.
- First off, clean the windshield properly. Otherwise, you may face various problems while riding the motorcycle.
- Secondly, select a fresh and cool surface for running an effective process. In this case, you need to park your motorcycle in a comfortable space.
- Thirdly, for better performance, you need to use soap or detergent. But some experts suggest not to use soap. Now the decision depends on you.
- However, you can consult with a cleaning company for a better experience and proper maintenance.
What to Avoid while Cleaning Polycarbonate Windshields
On the other hand, there are some acts that you must avoid while going through the above-mentioned cleaning process.
- Avoid a hot space and never run this process in direct sunlight.
- Secondly, never scrub the windshield. It’s a very crucial fact. Scrubbing will make scratches. So, you must avoid scrubbing.
- Thirdly, avoid paper towels and any other harmful towels. Because of cloth and towels, scratches can take place.
- Moreover, never let any dirt stay on the exterior of the windshield. If you do so, then it is possible to get a permanent scratch.
- Another crucial fact is avoiding using glass cleaner. Just keep in mind that you are working with polycarbonate, not a glass.
Final Verdict
As an enthusiast rider, you need a bright, clear, and clean windshield. It will ensure your maximum protection. On the other hand, an unclear polycarbonate shield may lead you to danger.
Hence, we hope you have a clear concept now on how to clean polycarbonate motorcycle windshields now. Apply the above-mentioned process while cleaning the motorcycle windshield. You will get an outstanding cleaning service.
Good luck!
